Menu structure
Page
21
of 82
4.2 Settings
The user can calibrate and validate the sensors using the settings screen.
For sensors that do not require calibration, it is only possible to edit the
moving average (refer to Figure 4.6). The settings screen also contains
greyed out buttons. To enable these, contact Green Instruments.
Figure 4.6: Settings screen
Pressing the pH, Turbidity or PAH button will generate a pop-up window, as
shown in Figure 4.6. Here it is possible to edit the moving average applied
on the signal. It is also possible to perform a calibration or a validation of the
specific sensor.
Figure 4.7: Sensor pop-up