Status LED
Push Button
mini USB
Neutrik Ethercon
Ethernet Connector
Overview
Ethernet connector:
Supplies access to the network and PoE (Power over Ethernet)
mini USB connector:
Supplies power when in standalone mode
Push button:
The Push button is used for activating pairing mode
Status LED:
Green Flash - Another network device with the same configuration is on the system
Red/Green Flash – No other network device with the same configuration on the system detected
Red - Slow Flash The antenna is ready to be paired with a belt-pack
The Green Go Antenna connects the wireless belt-packs to other Green Go Stations via ethernet.
It can also supply a Standalone setup, working as a connection between belt-packs.
Basic Functions
Pairing:
An Antenna needs to be paired with a belt-pack for the two to connect.
An antenna can serve up to 4 paired belt-packs, but remember pairing with up to 6 belt-packs
Roaming:
Belt-packs can be set to search (roam) for a better signal to other paired antennas
Standalone:
Using one antenna to create a Green Go network. This allows for a maximum of 4 paired belt-packs.
Whats in the box:
Wireless A Angled B 2 philips screws
1
User guide
Green Go Antenna
model nr. GGO-WAA
