Rear of
Box
Inside Box
Anti-slip
pins
210mm min.
Larger boxes
Smaller boxes
Mount the Camera in Nest Box
A.
Installing in one of our bird boxes:
Pass the 5M screw provided through the pre-
drilled hole in the back of the box, screwing
into the nut on the easy mount bracket.
Our innovative anti-slip bracket design will
hold the camera in place against the wood.
There is a gap in the eaves of the box through
which to pass your cables.
B.
If you do not have one of our bird boxes:
Following the diagram (right), drill a 6mm hole
at or above 210mm from the base of your box.
Then follow the
A
instructions above.
M
Make sure you are happy with the angle of
the camera by checking the image on the TV
and making any adjustments if need be.
