Green Brook Orion Range OD103 Important Safety Instructions Download Page 2

4.   Position sensor onto back plate and secure using the screw removed in step 1.

1.   Turn ‘Time’ control fully anti-clockwise 

     and ‘Lux’ control fully clock wise refer 

     to Dia: 4.

2.   Re-connect mains supply, allow 30 

     seconds for the sensor to warm-up, 

     and then perform a walk-by in front of 

     the sensor; lamp should turn on and 

     stay on for approximately 10 seconds, 

     and will go off if no further movement 

     is detected.

TESTING

ADJUSTING THE ‘LUX’ CONTROL

1.   Turning Lux control fully clock wise, the sensor will operate in both daylight and 

     darkness.

2.   Turning Lux control fully anti-clockwise, the sensor will operate in darkness only.

3.   Set control to operate at your required daylight level.

ADJUSTING THE ‘TIME ON’ CONTROL

1.    Turning the time control fully anti-clock wise will set the on duration to 10 seconds 

      +/- 3 seconds.

2.     Turning the time control fully clock wise will set the on duration to 15 m/- 

      2 minutes.

TROUBLE SHOOTING

Light not coming on

•      Check that lamp is good.
•      Check there is nothing obscuring the PIR sensor.

Intermittent operation

•      Check there are no curtains that can move in the wind.
•      Check there are no heating vents nearby.

TECHNICAL INFORMATION

Rated Voltage:                           230V~50Hz

IP Rating:                                      IP65

Ambient Light:                             <3-2,000 LUX (Adj)

Time Delay:                                  Min 10 sec ± 3 sec

                                                        Max 15 min ± 2 min

Rated Load:                                Max 1200W

                                                       Max 300W

Detection Range:                       180°

Detection Distance:                 12M max (<24°C)

Working Temp:                        -20° - + 40°C

Working Humidity:                   <93%RH

Power Consumption:              0.5W approx

Installation Height:                  1.8 - 2.5M

Detection Moving Speed:     0.6 - 1.5m/s

Dimensions:                              119.5 x 80 x 51.5mm

Conforms To:                            BS EN61058-1

Dia:4

Dia:3

3.   Secure the sensor back plate to the wall 

     using two wood screws (ensure there is no 

     wiring/gas/water services directly behind 

     the screws) Dia:3.

/LED

Issu

e n

o: 

70

68

21

WEST  ROAD  .  HARLOW

ESSEX . CM20 2BG . UK

[email protected]

www.greenbrook.co.uk

GUARANTEE

Your GreenBrook Motion Detector IP65 

OD103/B is guaranteed for 1 year 

from the date of purchase. 

This is in addition to your statutory rights.

PLEASE KEEP THESE INSTRUCTIONS 

SAFE FOR FUTURE REFERENCE

NOTE: 

Product & Packaging Disposal

When disposing of this item and its packaging please follow local

regulations and use an appropriate waste disposal centre. 

See GreenBrook website for further details.

OD103 B Ins Aug 21_Layout 1  21/02/2022  16:48  Page 2

Reviews: