This product uses an infra-red heat detector. The detector senses ‘warmth movement’ in the
surrounding area when it is dark. When movement is detected the sensor is activated and
triggers the connected load. It has a built in photo-cell that can identify day and night.
‘Orion Range’
Infra-red Motion Detector - Wall Switch
Model: OD100
Model: OD100 -
Function Switch:
‘ON’
= Permanently ON
‘OFF’
= Permanently OFF
‘PIR”
= PIR Control
Detection from
Above
Poor Sensitivity
FIELD OF DETECTION
Important Safety Instructions
•
Please read these instructions carefully before installation and keep safe for future
reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the
current IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
•
Always turn off the mains supply before commencing work.
As the detector responds to changes in temperature, avoid the following situations:-
•
Avoid pointing the detector towards objects with highly reflective surfaces, such as
mirrors etc.
•
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, lights etc.
•
Avoid pointing the detector towards objects that may move in the wind, such as
curtains, tall plants etc.
Dia:1
1. Unclip both face plates using a small
flat-blade screwdriver, refer to Dia:1.
Switch the mains supply OFF first to prevent electric shock.
INSTALLATION
Good Sensitivity
Dia:2
L
A
2. Connect the Live in wire to the ‘L’
terminal and Load out wire to the ‘A’
terminal, refer to Dia:2.
Note:
Suitable for wall mounting only.
Not suitable for parallel connections.
OD100 Ins Aug 21.qxp_GU10 05/11/2021 11:08 Page 1
