15
Technical Information
Service Manual
ƽ
The user could accord to sleep curve setting method to inquire the presetting sleep curve, enter into user
status, but do not change the temperature, press "Turbo" button directly for confirmation.
individuation sleep setting
Note: In the above presetting or enquiry procedure, if continuously within10s, there is no button pressed, the sleep
there is no button pressed, the sleep curve setting status will be automatically quit and resume to display the original displaying.
curve setting within10s,
In the presetting or enquiry procedure, press "ON/OFF" button, "Mode" button, "Timer"button or "Sleep" button, the sleep
curve setting or enquiry status will quit similarly.
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the indoor unit firstly
power on it will display the setting temperature,if the temperature's displaying status is changed from other status to" ",displays the
ambient temperature, 5s later or within 5s, it receives other remote control signal that will return to display the setting temperature.
if the users haven't set up the temperature displaying status,that will display the setting temperature.
10
TEMP:
CLOCK :
Press T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After press of this button,
disappears and "ON "blinks
.0
0:00 is displayed for ON time setting.Within
12
13
Press T-OFF button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again.TIMER OFF setting
Press CLOCK button, blinking . Within 5 seconds,pr or - button adjusts the present time.
Holding down either button above 2 seconds increases or decreases the time by 1 minute every 0.5
every 0.5 second. During blinking after setting, press CLOCK button
second and then by 10 minutes
again to confirm the setting,and then
QUIET:
11
Press this button, the Quiet status is under the Auto Quiet mode (display
and "Auto"
" "
signal)
and Quiet mode (display " "
singal) and Quiet OFF (there is no signal of " " displayed), after powered on, the Quiet OFF is defaulted.
Note: the Quiet function cannot be set up in Fan and Dry mode;Under the Quiet mode (Display " " signal),
not available.
the fan speed is
will be constantly
displayed.
T-ON / T-OFF:
+ or - butt on to adjust the time value.Every press of either
5 seconds,press
button changes the time
rapidly changes the time setting by 1 minute and then
setting by 1minute. Holding down either button
10 minutes.Within 5 Seconds after setting,press TIMER
ON button to confirm.
is the same as TIMER ON.
● This function is only available for some models.
"
"
e
h
t
,
n
o
d
e
n
r
u
t
s
i
n
o
it
c
n
u
f
i
F
i
W
n
e
h
W
.
n
o
it
c
n
u
f
i
F
i
W
f
f
o
n
r
u
t
r
o
n
o
n
r
u
t
o
t
n
o
tt
u
b
"
i
F
i
W
"
s
s
e
r
P
WiFi
icon will be displayed on remote controller; Under status of unit off, press "MODE" and " " buttons
simultaneously for 1s, WiFi
module will restore to factory default setting.
WiFi
LIGHT:
15
Press LIGHT button to turn on the display's light and press this button again to turn off the display 's
light. If the light is turned on
is displayed. If the light is turned off, disappears.
TURBO:
14
WiFi:
16
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset temperature in the shortest time.
In COOL mode, the unit will blow strong
Press " + " and "- " buttons simultaneously to lock or unlock the keypad. If the remote controller is
In this case, pressing any button, blinks three times.
Combination of "+" and "-" buttons: About lock
17
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air at super
high fan speed.
locked, is
displayed.
At unit OFF, press
"
MODE
"
and
" - "
buttons simultaneously to switch between and .
ć
̧
Combination of "MODE " and "-" buttons :
18
About switch between Fahrenheit and centigrade
Press
"
TEMP
"
and
"
CLOCK
"
simultaneously in COOL mode to start energy-saving function.
Nixie tube on the remote controller displays
"
SE
"
. Repeat the operation to quit the function.
Combination of " TEMP " and "CLOCK" buttons : About Energy-saving Function
19
