background image

Multi Variable Air Conditioners 

Heat Storage Module 

1 Safety Notices (Please be sure to abide ) 

 

WARNING:

 If not abide strictly, it may cause severe damage to the unit or the people. 

 

NOTE:

 If not abide strictly, it may cause slight or medium damage to the unit or the people. 

 

This sign indicates that the operation must be prohibited. Improper operation may cause severe 
damage or death to people. 

 

This sign indicates that the items must be observed. Improper operation may cause damage to people 
or property. 

 

WARNING!

 

This product can’t be installed at corrosive , inflammable or explosive environment or 

the place with special requirements, such as kitchen. Otherwise, it will affect the normal 
operation or shorten the service life of the unit, or even cause fire hazard or serious injury. As 
for above special places, please adopt special air conditioner with anti-corrosive or 
anti-explosion function .   
 

 

Follow this manual to 
complete the installation 
work. Please read this 
manual carefully before 
turning on or repairing the 
unit. 

 

Installation should be 
performed by the 
distributor or qualified 
technicians. Do not install 
the product by yourself. 
Improper installation may 
lead to water leakage, 
electric shock or fire 
hazard, etc. 

 

Before installation, please 
check whether the power 
supply is complied with that 
specified on the nameplate 
and check the safety of the 
power supply. 

 

When installation is 
finished, please check 
whether the pipelines and 
electric wires are 
connected correctly to 
avoid water leakage, 
refrigerant leakage, 
electric shock or fire, etc. 

 

Be sure to use special 
accessories and parts for 
installation to prevent water 
leakage, electric shock and 
fire hazard, etc. 

 

If refrigerant leakage 
happens, please ventilate 
the room immediately. 

 

Diameter of power cord 
should be large enough. 
The damaged power cord 
and connection wire must 
be replaced with special 
cables. 

 

When the power cord is 
connected, please fix the 
electric box cover properly 
to avoid safety accidents. 

Summary of Contents for XRZ180L/A-T
















Reviews: