Multi Variable Air Conditioners Duct Type Indoor Unit
4
5
3 Preparations for Installation
Notes:
Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm.
3.1 Standard Fittings
Please use the supplied standard fittings listed below as instructed.
No.
Name
Graphics
Quantity
Function
1
Wired Controller
1 PC
Control indoor unit
2
Screw M4X25 (Cross
recessed small pan head
screw)
3 PC
Secure the wired controller
3
Drain Hose Sub-assy
1 Set
Connect drain pipe
4
Union Nut Sub-assy
1 Set
Connect exit pipe
5
Nut with Washer M10X8
4 PC
Hang indoor unit
6
Nut M10 (Type 1 Hex Nut
M10X8.4))
4 PC
Hang indoor unit
7
Washer 10
(Spring Washer M10X2.6)
4 PC
Hang indoor unit
8
Insulating Jacket of Header
1 PC
Wrap the joint of header
9
Insulating Jacket of Liquid-
in Pipe
1 PC
Wrap the joint of liquid-in pipe
10
Sponge of Drain Pipe
2 PC
Wrap the joint of drain pipe
11
Cable Tie
8 PC
Wrap the joint sponge
12
Installation Paper Pattern
/
1 PC
For drilling hole in the ceiling
Note:
The fittings list above is subject to change without notice, please refer to the packing list
provided with indoor unit.
