DC Inverter U-match Series Duct Type Unit
5
Fig. 3.1
(4)
Install the unit where the drain pipe can be easily installed.
(5) Provide as much
space
as possible
from the unit to the ceiling
to enable
convenient servicing
.
3.2.2 Outdoor Unit
①
Install the unit where it will not be tilted by more than 5°.
②
During installation, if the outdoor unit
is
exposed to strong wind
s
, it must securely
anchored
.
(1)
If possible, do not install the unit where it will be exposed to direct sunlight.
(If necessary, install a blind that does not interfere with the air flow.)
(2)
Install the outdoor unit in a place where it will be free from getting dirty or
getting wet by rain as much as possible.
(3)
Install the outdoor unit where it is convenient to connect the indoor unit.
(4)
Install the outdoor unit where the condensate water can be drained out
freely during
heating
operation. Do not place animals and plants in the path
of the warm air.
(5)
Take the air conditioner weight into account
when installing
and select a
place where noise
and vibration
will be minimal
.
(6)
Install the outdoor unit where is capable of withstanding the weight of the
unit and generates as less noise and vibration as possible.
(7)
Provide the space shown in Fig. 3.2, so that the air flow is not blocked. Also
for efficient operation, leave three of four directions of peripher
y
open.
