Installation and disassembly of heat discharge pipe
Note of Install heat discharge pipe
In order to improve cooling efficiency, the heat discharge pipe should be as
short as possible and flat without curve to ensure smooth heat discharge.
correct
correct
correct
wrong
Disassemble heat discharge pipe
1. Remove joint B:
remove joint B from joint C.
2. Remove joint A:
Rotate joint A in the arrow direction and
then remove it.
joint B
joint C
Operation test
● Put through the power supply and then press ON/OFF button on remote contro-
ller to start the unit.
● Press mode button to select auto, cooling, drying, fan or heating function, and
then check if the unit operates normally.
● If ambient temperature is below 16°C, the unit can't operate in cooling mode.
10
