The Mini-Floor Console can be piped from the right or left hand side by removing a pre-formed
knockout hole in the side trim piece.
1. Locate and remove screws holding the unit trim. Refer to figure below.
2. Release two locking tabs per section and carefully remove the unit trim pieces.
3. Using a sharp blade or pliers, remove the required knockout from the bottom of the side trim.
4. Replace all trim pieces on unit casing.
INDOOR UNIT INSTALLATION
Remove the front cabinet from the unit casing. Refer to figure below.
1. Locate and remove 4 mounting screws.
2. Disengage 3 locking tab on top and 2 on the bottom of front cabinet and gently separate
from unit casing.
Preparing Indoor Unit for Installation
For Side Piping (Right or Left) Applications Only
7
