Gree Multi+ Ultra MULTIU18HP230V1DO Page 58 Service & Parts Manual Download

Page: 58 / 65

Installation and Maintenance

Service Manual

Steps

Procedure

20.Remove supporting board and supporting board sub-assy

supporting
board sub-assy

supporting board

Remove the screws connecting the gsupporting
board and supporting board sub-assy and remove the
gsupporting board and supporting board sub-assy

compressor

21.

Remove compressor

Remove the 3 foot nuts fixing compressor and then lift

the compressor upwards to remove the compressor

and damping cushion.

Note:

Keep the ports of discharge pipe and suction pipe from

foreign objects.

22.Remove compressor mounting plate sub-assy

Remove the 4 foot nuts fixing compressor mounting
plate sub-assy and chassis, to remove the compressor
mounting plate sub-assy.

compressor mounting
plate sub-assy

Summary of Contents for Multi+ Ultra MULTIU18HP230V1DO


































































Search results

Summary of Contents for Multi+ Ultra MULTIU18HP230V1DO

Reviews:

Related manuals for Multi+ Ultra MULTIU18HP230V1DO

Brands by name

Popular brands

Gree Multi+ Ultra MULTIU18HP230V1DO, Service & Parts Manual

Search results

Summary of Contents for Multi+ Ultra MULTIU18HP230V1DO

Reviews:

Related manuals for Multi+ Ultra MULTIU18HP230V1DO

Brands by name

Popular brands