VRF Protocol Gateway
18
(3) Gateway configuration:
One gateway connects to 16 sets of systems and 255 sets of indoor units
simultaneously. After installation, the parameters of gateway should be set. Before
setting the parameters of gateway, please set the IP address of PC as the same
with the IP address in the same network segment of gateway, as refer to appendix A;
and then open the browser (IE10 and above version, Firefox or Google), input the
default IP address of gateway: http://192.168.1.150, default user name: config,
password: config; as shown below.
Fig. 7.11 Log on interface
Setting of gateway protocol functions:
After inputting user name and password, click the arrow to enter the setting
interface, as shown in Fig. 7.12, 7.13, and 7.14; in the setting interface 1, you can
select the protocol function; in the setting interface 2, you can set the IP parameters
of gateway; in the setting interface 3, you can set the equipment information.
Note: When the gateway is energized, it will conduct default Modbus protocol
function, when select to reset the gateway and log on the gateway setting interface
again, the protocol option of interface 1 is blank, you can select according to
demand.
