NOTE:
Not every unit has each of the functions described below. If your unit does not come equipped with a certain
function, the button will be inactive.
X-FAN button
Pressing the X-FAN button in COOL or DRY mode
will keep the fan running for 10 minutes to dry the
indoor unit. After drying, X-FAN OFF is defaulted.
This function is not available in AUTO FAN or HEAT
modes.
- Button
Use this button to decrease temperature in HEAT or
COOL modes. Press button for 2 seconds to activate.
+ Button
Use to increase temperature settings in HEAT or
COOL mode.
NOTE:
In heat, cool, and dry mode, the room
temperature setting will be displayed.
In AUTO mode, the temperature display is off and
the + and - Buttons are not used.
SWING UP and DOWN BUTTON
Use this function to control direction of air circulation.
Select from fi ve louver positions available by pressing
the button. When the guide louver begins to swing up
or down, it turns off the SWING function and will
appear as the louver position is readjusting.
TIMER ON button
When TIMER function is activated, the (clock icon)
will blink and numerical display becomes the timer
readout. Press the + or – button to adjust time. Every
press of the + or – keys adjusts time by 1 minute.
Within 5 seconds of setting the timer, press the
TIMER ON button to set the timer. Please check the
clock setting for accuracy after setting timer.
TIMER OFF button
To cancel TIMER settings, press TIMER OFF button.
Clock icon will blink, and settings will be canceled.
I FEEL button
Press this button to activate I FEEL. When I FEEL
is active, the evo unit will use the room temperature
measured by the remote control.
TEMP button
This function not available.
Air button
This function not available.
Health button
This function not available.
WIRELESS REMOTE CONTROL OPERATION
Names and Functions of Remote Control Buttons
OFF
Remote
Control
-
+
TIMER
ON
TIMER
OFF
8