19
1. Remove the rubber plug at drainage port.
2. Fix the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
drainage port
drainage port
drainage pipe clip
screw
Note:
When using the continuous drainage option from the bottom hole,
install
drainage pipe before using, otherwise poor drainage will affect normal
operation of the unit.
There are 2 ways to remove collected water:
■
Instructions for drainage pipe installation as follows
.
Use the continuous drainage option from the bottom hole
1
Removing Collected Water
pipe hoop
drainage pipe
drainage
pipe clip
pipe hoop
rubber plug
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
