Multi Variable Air Conditioners Cassette Type Indoor Unit
5
No.
Name
Appearance
Q'ty
Usage
5
Drain Hose Assembly
1
To connect with the hard PVC drain
pipe.
6
Special Nut
2
GMV-ND28~50T/A-T.
1
GMV-ND56~160T/A-T.
7
Corrugated pipe
1
GMV-ND56~160T/A-T.
8
M10 Washer
10
To be used together with the
hanger bolt for installing the unit.
9
Insulation
1
To insulate the gas pipe.
10
Insulation
1
To insulate the liquid pipe.
11
Sponge
4
To insulate the drain pipe.
12
Fastener
4
To fasten the sponge.
3.2 Installation Position Selection
(1) The appliance shall not be installed in the laundry.
(2) The location should be able to withstand the weight of unit.
(3) The water can be drained conveniently from drainage pipe.
(4) There should be no obstruction near air inlet and air outlet.
(5) Follow the installation distance required in the fig below to ensure sufficient space for
maintenance.
(6) The installation location should be far from heat sources, flammable or explosive gas, or smog
spread in the air.
(7) The indoor unit, outdoor unit, power cord and connection electricity wire should be at least 1m
from television and radio in order to prevent interference and noise (Even though 1m distance is
ensure, there may be noise if the electric wave is too strong).
Unit:mm
Fig.3.2
