Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
13
4.4.2 Panel Installation
(1) Remove the grille from the panel, and then open the horizontal louver.
(2) Aim the screw hole on panel at the corresponding screw hole on main unit.
(3) Screw up the screws on corresponding holes and then install the corresponding screw
cover.
(4) Close the horizon lover, connect the butt terminal and arrange the wires.
(5) After tightening screws, reinstall the air inlet grille.
Fig.4.4.4
4.5 Installation of Wired Controller
Please refer to User Manual of Wired Controller for the installation details.
NOTICE
! When installation is finished, the unit must be tested and debugged before operation.
Please refer to Instruction Manual of ODU for auto addressing and debugging details.
