Gree GK-H03NH3AS Owner'S Manual Download Page 6

Rooftop Packaged

 

WARNING 

(1) 

This  product  can’t  be  installed  at  corrosive,  inflammable  or  explosive 
environment  or  the  place  with  special  requirements,  such  as  kitchen. 
Otherwise,  it  will affect  the  normal operation  or shorten the  service  life  of  the 
unit, or even cause fire hazard or serious injury. As for above special places, 
please  adopt  special  air  conditioner  with  anti-corrosive  or  anti-explosion 
function. 

(2)  Do  not  use  or  store  flammable,  explosive,  poisonous  or  other  dangerous 

substances beside the air conditioner. 

(3)  Any person who is involved with working on or breaking into a refrigerant circuit 

should hold a current valid certificate from an industry-accredited assessment 
authority,  which  authorises  their  competence  to  handle  refrigerants  safely  in 
accordance with an industry recognised assessment specification.   

(4)  Servicing  shall  only  be  performed  as  recommended  by  the  equipment 

manufacturer. Maintenance and repair requiring the assistance of other skilled 
personnel shall be carried out under the supervision of the person competent in 
the use of flammable refrigerants. 

(5)  The appliance shall be installed in accordance with national wiring regulations. 

(6)  An all-pole disconnection switch having a contact separation of at least 3mm in 

all poles should be connected in fixed wiring. 

(7)  Air conditioner should be stored with protective measures against mechanical 

damage caused by accident.   

(8)  During installation, use the specialized accessories and components, otherwise 

water leakage, electric shock or fire hazard may occur. 

(9)  Please install the air conditioner in a secure place that can withstand the weight 

of  air  conditioner.  Insecure  installation  may  cause  the  air  conditioner  falling 
down and lead to injury.   

(10) Be  sure  to  adopt  independent  power  circuit.  If  the  power  cord  is  damaged,  it 

must  be  repaired  by  the  manufacturer,  service  agent  or  other  professional 
agents. 

(11) In case of trouble (e.g. burnt smell), please immediately cut off the main power 

of air conditioner unit. 

(12) The  air  conditioner  can  be  cleaned  only  after  it  is  turned  off  and 

power-disconnected, otherwise electric shock may occur. 

(13) The  air  conditioner  is  not  intended  to  be  cleaned  or  maintained  by  children 

without supervision.   

(14) Do  not  alter  the  setting  of  pressure  sensor  or  other  protective  devices.  If  the 

protective  devices are  short-circuited or changed against  rules,  fire hazard or 
even explosion may occur.   

(15) Do  not  operate  the  air  conditioner  with  wet  hands.  Do  not  wash  or  sprinkle 

water on the air conditioner, otherwise malfunction or electric shock will occur. 

(16) Do not dry the filter with naked flame or an air blower; otherwise the filter will be 

out of shape.   

Summary of Contents for GK-H03NH3AS





























Reviews: