39
Maintenance
Service Manual
13.Remove grille
14.Remove guide loop
15.Remove centrifugal blade
Remove 4 screws fixing the propeller
housing at the back of cover plate, and
then remove the guide loop.
Remove nut and 2 gaskets fixing the
Blade at the motor shaft terminal, take
out the blade along the motor shaft and
then remove the blade sub-assy.
Remove one screw fixing the propeller
housing, pull the grille backwards to let
It separate from 2 grooves, and then
remove the grille.
grille of panel
screw
groove
screw
ⴆᶯ
nut
gasket
centrifugal blade
washer
Step
Procedure