14
Please reaffirm the problems before asking for maintenance.
Symptoms
Check
Processing method
Is the power plugged in?
Plug the power supply
There is no air blowing
Thoubleshooting
Is the panel correctly installed?
I Plug the power supply
Can not start
Whether the battery is dead?
The remote control
does not work
Are the positive and negative
poles installed reversely?
Does indoor fluorescent light
keep flickering for the reason
of lifespan?
Keep the machine in a distance
from the fluorescent
Install the battery correctly
Replace with new battery
Please contact the after-sales
service in this case
Do not achieved the
cleaning effect
Is it installed in unventilated
areas or are there any obstacles
near the machine?
Is there too much dust on the
filter components, filter cotton
and HIMOP + HEPA filter
components?
Is there too much odor and
smoke produced?
Remove obstacles
Clean the filters, and replace
filter cotton
Clean activated carbon filters
The TV signal is in
interference
Are there any TV, radio within 2
meters away from the machine
or is there any indoor antennas
near the machine?
Are there any power cords or
television sets, radio antenna
which are close to the machine?
Move the TV, radio, and indoor
antennas more than 2 meters
away from the machine.
Keep the power lines or television
sets, radio antenna as far as
possible away from the machine.
It smells in the air outlet
Is there lots of smell released
temporarily?
(Many
people
smoke or barbecue.)
Is the activated carbon filter not
cleaned or replaced for a long time?
The smell will be gradually
disappearing when the machine
runs for some time.
Maintain the activated carbon filters