18
Maintenance for Dedust Parts
Maintenance standard
When the cleaning indicator light
is on or there’s dirt
Maintenance method Wash with water, and wipe
Notice
Content
Dust collecto
Negative plate
Notice
1.Remove the negative plate
from the dust collector assy.
See P18
See P18
①
static
dedusting rack
(please use it
after dipping and
before drying
out)
●
Please
wipe out the
dirt on plastic
component with
soft cloth
Wipe with cotton
stick for the spot
which is not
available with
fi
ngers.
●
Do not leave
the
fi
bre of
cloth on the
component.
Incorrect
reaction might
be caused.
2.collect the surface dust with
dust-collecter.
3.Dip in the water for 1hours.
4. Wipe the dirt with cloth or soft
brush. Please wear cleaning
gloves.
5.Wash with water
6.Place it at ventilated and shady
spot and dry out.
Open the panel, take out the dedusting parts and remove the negative plate which
need cleaning
●
Hold the handle, pull outward and lift, to remove
the static dedusting parts
●
Remove the screws to remove the
negative plate.
Hold both sides to
easily remove the
plate.
Wear rubbish gloves
1. Please wear rubber gloves when wiping and cleaning.
2. Do not break the tungsten
fi
lament during disassembly
and cleaning.
▲
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
