If wireless remote controller is lost, open the surface panel and operate
manually.
Note:
ＣＬＯＳＥ ＶＥＮＴ ＯＰＥＮ
ＣＬＯＳＥ ＶＥＮＴ ＯＰＥＮ
-"OPEN" position,the ventilation door
opens to allow air,smoke or odors to
be expelled from the room.
-"CLOSE" position,the ventilation door
is closed and the air will be circulated
inside the room and conditioned.
VENTILATION LEVER
Ventilation Lever
When the slider at the:
When the slider at the:
Remote control panel
1
Operation starts when pressing this button, and stops
when pressing this button again.
2
FAN BUTTON
Select the fan speed HIGH, MID, LOW and AUTO in sequence.
3
MODE BUTTON
5
SIGNAL RECEIVER
6
SWING BUTTON
Activate the automatic air swing function.
7
FILTER BUTTON
This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation and
cooling. The LED (light) will illuminate after 250 hours
"Check Filter" button and the light will go off.
of operation. To reset after cleaning the filter, press the
15
BUTTON
ON/OFF
AUTO,COOL,FAN, DRY
HIGH
MID
LOW
AUTO
CO OL
DRY
FAN
FILTER
TIMER/TEMP
MODE
FAN
ON/OFF
SWING
Select the operation mode
.
4
TIME/TEMP BUTTON
Press the
+
keypad to increase the set (operating) temperature of the unit. and
Press the
_
keypad to decrease the set (operating) temperature of the unit.
The temperature setting range is from 16~30°C.Press the keypad also to
+
increase the selected time in 0.5 hour increments, and Press the
_
keypad to
to decrease the selected time in 0.5 hour decrements, The time setting range
+
is from 0~10 hours. Press the keypad also to increase the selected time in
_
1 hour increments, and Press the keypad to decrease the selected time in
1 hour decrements, The time setting range is from 10~24 hours.
