background image

9

Window 
Sill

Window 
Sash

Screws

Frame Locking Brackets (2)

Left

Right

To install the 

Window Sill & Sash Seal

, cut the 

seal to fit the length of the window. Peel off the 
backing, and attach to window sash and window 
sill. 

Place the air conditioner on the sill with the 

Lower 

Guide Rail

 against the back edge. Center the unit, 

and close the window securely behind the 

Upper 

Guide Rail

. The unit should be slightly tilted to the 

outside. Use a level: about 1/3 bubble will show 
correct slant.

To install the fixed bracket, attach the bracket to the 
window side sash with one 

Type B Screw

. This 

prevents broken glass or damage to the windows. 

Front View

Side View

Vinyl 

Window

Wooden 

Window

 

NOTE:  

Top Rail and sliding panels at each side are offset to provide the proper pitch to the 

rear of .8 cm (5/16”). This is necessary for proper condensed water utilization and drainage. If 

you are not using the side panels for any reason, this pitch to the rear must be maintained.

5

7

6

8

Extend the left and right 

Flexible Screens

 to the 

window sashes. Attach 

3 Type B Screws 

in holes in 

the upper panel. Install the 

Frame Locking Brackets

 

between the bottom of the 

Flexible Screen

 and the 

window sill, attach with 

2 Type B Screws

.

Window Sill & 
Sash Seal  
(With Adhesive)

 Note: 

In order to prevent the window 

sill from splitting drive the pilot holes before 
inserting the screws.

 Note: 

To install the air conditioner onto 

the window sill, it is recommended to use 2 
PEOPLE.

INSTALLATION INSTRUCTIONS

NOTICE:

 

This picture is for reference only.  Please refer to the actual product for the appearance.

BACK

FRONT

Upper Guide 
Rail

Lower Guide 
Rail

Window Frame

Horizontal or inclined about 3°

Summary of Contents for G17-12ESCWAC1






















Reviews: