Centralized Controller
39
No.
Name
Instructions
6
Icon of sheidling
status
If the unit is in shielding status, this icon will be
shown.
7
L-CAC&Split unit
registration icon
Press the icon to enter the registration page for
the unit.
8
All off button
Press the icon to turn off all the units.
9
Page turning
Press this icon to turn pages.
10
L-CAC&Split unit
icon
Display the current L-CAC&Split unit icon.
11
All on button
Press the icon to turn on all the units. Then units
will run according to memories.
12
L-CAC&Split unit
name
Display the current L-CAC&Split unit name.
Before using, press the registration icon and enter the registration page.
Register the L-CAC&Split units that are going to be controlled. Centralized
controller can support the control of 36 units at most.
Press and hold L-CAC&Split unit icon for 5S to enter the page of settings. Then
you may set the name and icon for the unit.
L-CAC&Split unit control parameters include general control parameters and
advanced control parameters.
NOTES:
①
The functions of group control and engineering setting of the Centralized
controller are only applicable to multi VRF units. L-CAC&Split unit do not have
the above function.
②
When in the fuctionof All-central control, all the Mulit-VRF unit and L-CAC&Split
unit are controllered, but L-CAC&Split unit not controllered by advance seting.
Summary of Contents for CE52-24/F(C)
Page 50: ......
