―１０―
2. Factory Parts Removal
2. Factory Parts Removal
2. Factory Parts Removal
2. Factory Parts Removal
When removing the stock parts, make sure you read over the factory repair manual
When removing the stock parts, make sure you read over the factory repair manual
When removing the stock parts, make sure you read over the factory repair manual
When removing the stock parts, make sure you read over the factory repair manual
for proper procedures.
for proper procedures.
for proper procedures.
for proper procedures.
2-1 Disconnect the negative terminal of the battery.
2-2 Remove the under engine cover.
2-3 Drain the engine oil, coolant and power steering fluid.
2-4 Disconnect the air flow meter.
2-5 Remove the Air cleaner assembly with airflow meter, intake tube, and breather hose.
2-6 Remove the Top Radiator Hose and the Water Pipe (Located above the Right Exhaust
manifold).
2-7 Disconnect the primary and secondary O2 sensor and remove the exhaust manifold and
catalytic converter.
2-8 Remove the exhaust manifold.
2-9 Remove oil pan (Please refer to the factory service manual for detail instructions f or
removing the oil pan.)
2-10 Remove the upper intake manifold collector, fuel rail assembly with injectors and regulator.
2-11 Remove the front bumper.
2-12 Remove the bumper reinforcement.
2-13 Remove the left and the right side horn.
2-14 Remove the Power steering fluid cooler.
