DATA LOCK
■Programming■
DATA LOCK
SET
SET
Entry of the 3-digit password
Entry of the 3-digit password
SET
Hold down
SET DIAL
SET UP
Confirmation screen
Configurations
To prevent unwanted changes or loss of data, DATA LOCK can password protect the
program setting for LO / HI / SCRAMBLE / START (BOOST), but will not lock the
PATTERN and ALARM from changes.
(1) In the main SET UP screen, rotate the SET DIAL to
highlight LOCK. Then press the SET DIAL to confirm.
(2) Rotate the SET DIAL to highlight and select ON. Then
press the SET DIAL to confirm.
(3) Once DATA LOCK is confirmed to ON, a new screen will
appear and allow you to program a 3 digit password for
the DATA LOCK. * To cancel and return to the main SET
UP screen, press MODE.
(4) Press the SET DIAL to confirm and move to the next
square. Repeat and move to the third square. After the
third square, press SET DIAL to return to the first square.
(5) After entering the 3 digit password, hold down SET DIAL
for 3 seconds to save. Once saved, there will be a chime
and the screen will return to the main SET UP screen.
