Page 9
L
J
Page left blank intentionally
Refer to Figure F for steps 16-21
Step 16: Install the silicone coupling onto the throttle body with the clamps provided.
Step 17: Install the Greddy filter into the housing using the suppied clamp 11 .
Step 18: Install the Greddy tube onto the silicone coupling and air filter.
Step 19: Re-connect the MAF plug onto the MAF sensor.
Step 20: Connect the new crank case hose onto the tube and valve cover 12 .
Step 21: Tighten and verify that all clamps are secure. Your installation is now complete!
Figure F
INSTALL
Page
11
12
GReddy.com
