Greatneck 26006 Owner'S Manual Download Page 6

6

        

WARNING:

 The lithium ion battery

pack is an integral part of the tool. If it
will no longer charge properly or is
damaged, the tool and battery must not
be discarded as household trash,
burned or thrown into water. The tool
and battery must be disposed of as
hazardous waste in accordance with all
municipal requirements.

Do not incinerate a discarded battery

. It

can explode in a fire.

Do not use an extension cord

. Plug the

charger cord directly into an electrical
outlet.

Charge the battery only with the charger
supplied with the cordless screwdriver

.

Do not use the charger in wet or damp
conditions

. It is intended for indoor use

only. Do not use the charger near sinks or

bathtubs. Do not immerse the charger in
water.

Do not allow the cord to hang over the
edge of a table or counter or touch hot
surfaces

. The charger should be placed

away from sinks and hot surfaces.

Do not use charger to charge any

batteries other than the cordless
screwdriver battery

. Other batteries may

explode.

Do not operate charger if cord or plug is
damaged

. Replace damaged cord and

plug immediately.

Do not operate charger if it has received

a sharp impact

, been dropped or

otherwise damaged in any way. Have a
qualified technician examine the charger

and repair it if necessary. Do not
disassemble the charger.

For best results

, charge the battery when

the temperature range of the battery and

the work area is 0–40° C (32–104° F).

Unplug the charger when not in use

 and

before cleaning or maintenance.

Do not abuse the cord

. To reduce the risk

of damage to the electric cord or plug,
never carry the charger by the cord or yank
the cord to pull the plug. Always grasp the
plug and pull to disconnect. Always keep
the cord away from heat, oil and sharp
edges

BATTERY & CHARGER SAFETY

!

Summary of Contents for 26006
















Reviews: