3
42000 Rev C 8-26-13
INSTALLATION INSTRUCTIONS
TOOL REQUIRED
Magnetic Phillips Screw Driver
Unpacking the Electric Fireplace
WARNING!
Do NOT use this Electric Fireplace if any part has been under water.
Immediately call a qualified service technician to inspect and to replace any part of
the electrical system if necessary. Keep plastic wrapping away from children.
●
Open the packaging carefully and remove the foam.
●
Remove and discard the plastic bag.
●
Be responsible when handling the packing materials.
●
Keep the original packaging for future transport and/or storage.
●
Check all accessories are got before you keep the packing.
PARTS AND HARDWARE LIST
remote control 1pc
button cell battery 1pc
instruction manual 1pc
screw ST4
×
38 with nut 4pcs
PRODUCT SIZE
Fireplace insert for
front fix
Insert Surround
Existing Fireplace
units: i n
Model
Width
（
W
）
Height
（
H
）
Depth
（
D
）
Fireplace opening size
Fireplace Minimum Depth
（
OD
）
Width
（
OW
）
Height
（
OH
）
Min Max Min
Max
GI-29
28.4
22.6
8.7
26.1
21.7
8.3
IS-36
36.25
27
1
29
36
22
26.8
9
IS-42
42.25
28.5
1
29
42
22
28.4
9
LOCATING YOUR ELECTRIC FIREPLACE INSERT
Your new electric fireplace may be installed virtually anywhere in your home. The GI-29 was designed
ideally for installation into existing fireplaces; however, when choosing a location ensure that the
general instructions are followed. For best results, install out of direct sunlight. Power supply service
must be either completed or placed within the electric fireplace prior to finishing to avoid reconstruction.
DANGER-High temperatures may be generated under certain abnormal conditions. Do not partially or
fully cover or obstruct the front of the heater.
Clearance to Combustibles
Clearances to sides, floor, top and back: 0 in (0mm)
O
O
O
