Version 202001 Updated 08/2020
２７
To preform this procedure:
1. Turn off the machine, allow all moving parts to come to a complete stop,
and disconnect the spark plug wire.
2. Remove the side cover plate to expose the blades. (Pic. 24)
3. Remove one blade, rotate the impeller, then remove the second blade.
4. Have the original blades professionally sharpened, or order a replacement
set, then re-install the blades.
5. Replace the side cover plate and re-attach the spark plug wire.
8.3. REPLACING THE V-BELT
Replace or tighten the V-belt when you notice the motor running but the
chipper blades are not spinning.
1. Turn off the machine, allow all moving parts to come to a complete stop,
and disconnect the spark plug wire.
2. Remove the V-belt cover as shown in Pic. 25.
3. Roll the belt off from the pulleys and install the new belt.
