GREAT VIGOR 1/10th Scale Electric Off Road Buggy, Instruction Manual

Page: 3 / 56

x
Adjust the right hand trim lever so that the model
runs in a straight line with the stick in the neutral
position.
x
Avoid running the car in crowded areas.
x
Make sure that no one else is using the same fre-
quency.
x
Avoid running the car in water. Should the radio
equipment, motor or battery get wet, all the
components must be thoroughly dried.
x
Clean the car after use completely removing any
sand, mud or dirt.
x
Keep suspension, gears and bearings well lubri-
cated.
x
Become familiar with the car’s handling before
driving at high speed.
x
Fit a freshly charged drive battery into position and
connect the battery making sure that the on/off
switch on the car is in the off position.
x
Turn on the transmitter and extend the antenna.
x
Switch on the car.
x
Move the right hand control stick and check that
the cars front wheels move in the correct direction.
If not, use the servo reversing switch marked Ch.1
to change the direction.
x
Gentle move the left hand control stick forward.
The car should move slowly forward. If not, use the
servo reverse switch marked Ch.2 to change the
direction.
x
After use, the switch on the car must be turned off
first and the drive battery disconnected.
x
The transmitter can then be turned off.