GREAT PLAINS YP4425A, Operating Manual, Page: 21 / 170

YP4425A Table of Contents Index Preparation and Setup 17
2018-07-30 Table of Contents Index 401-805M
Electrical Hookup
Refer to Figure 5
Make sure tractor is shut down with accessory power off
before making connections.
1. Mate lighting connector to tractor outlet.
2. Mate monitor connector to tractor harness.
3. Mate any optional or aftermarket electrical
connectors.
Make connections prior to planter movement. Some
planter hydraulic circuits are under monitor control.
Hitching with 3-Point
Refer to Figure 6 (which depicts the similar YP40
hitch)
1. Connect your tractor 3-point to the planter 3-point
hitch. If using quick hitch be sure planter locks into
hitch securely.
2. Raise tractor 3-point enough to relieve pressure from
parking stands.
Load Sway Hazard:
Adjust 3-point hitch arms and sway blocks to minimize any
side-to-side sway to assure proper tracking in the field, and
safe road travel.
Figure 5
Connector Identification
25236
25237
1
2
Figure 6
3-Point Hitch
29242