Great Plains
| 586-537Q-ENG | 04/26/2019
34
3500-4000TM
Assembly
Reel Following Rolling Harrow (optional)
It is very important to install the reel assembly in the order
shown below and go to the rolling harrow placement
drawing, see “Layout Section” of this manual for proper
dimensions where it is marked xxx in drawing below. The
reel arm assemblies dimensions are coming off of rear
tube of drag frame to side of plate of reel arm assemblies
. The reel tube assemblies are dimensioned off of end
of reel tube to side of plate on reel arm assembly
(dimensions in layout drawings may come off either end
of tube). For complete parts breakdown see “Attachment
Section” of Parts Manual.
Refer to Figure 31
131.Install mounting reel arm assemblies in position shown
in reel following rolling harrow placement drawing with
5
8
x 3
1
32
x 4
1
2
u-bolts
,
5
8
lock washers and nuts.
Torque u-bolts to 150ft-lb.
132.Attach reel tube assemblies in direction shown in circle
and place them in position shown (with arrow towards
machine) with
5
8
x 2
17
32
x 3
1
2
u-bolts , secure with
5
8
lock washers and nuts. Torque u-bolts to 150ft-lb.
133. Check to see that all bolts have been tightened to specs,
1
1
3
1
1
2
3
4
2
1
3
4
Figure 31
Reel Following Rolling Harrow
43236
