manualshive.com logo in svg

GREAT PLAINS TSF1080, Operator'S Manual

Share
Download
GREAT PLAINS TSF1080 Operator'S Manual Download Page 47

TSF1080, TSF1090, TSF1280 & TSF1290

Table of Contents

Index

Operations

43

08/01/2018

Table of Contents

Index

500-641M

Filling Tanks

Always fill the hand wash tank first.

Filling Hand Wash Tank

Use only potable or distilled water in the hand wash tank. In
the event of a chemical accident, it may be necessary to spray
this water into your eyes.

Keep the hand wash tank clean, and free of mold and fungus.
After a period of storage, scrub the inside using a mild
detergent. Rinse thoroughly.

Plug or cap the hose when parked or stored, to prevent pests
from entering, nesting and plugging the hose. Test the valve
and hose when filling.

To fill the hand wash tank:

Refer to Figure 29

1.

Open the filler cap 

 and inspect the condition of the 

tank interior. If any debris, sediments, deposits or 
growths are seen, scrub and rinse the tank before 
use.

2.

Unplug/uncap the hose and open the valve 

.

3.

Begin adding clean water at the filler.

If water flows freely out the hose, close the valve.

If water does not flow freely out the hose, stop
adding water, and clear the obstruction.

4.

Close the valve and complete filling the tank.

Figure 29

Hand Wash Tank Fill

27268

1

2

1

2

Summary of Contents for TSF1080































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands