6). Leveling Drill.
a. Unlock all transport fold locks.
b. Carefully unfold the drill.
c. Lock all field locks into place.
7). Check to make sure all field latches function correctly.
8). Remove all six transport lock channels and lift the drill fully to rephase the
cylinders. Lower the openers until they almost touch the ground. Make sure the
drill is lowering evenly.
a). If the unit is un-level use the end gaugewheel
eyebolts to level the drill side to side. Shortening the
eyebolt will lower the wings.
b). If the unit is unlevel front to rear use the
eyebolt on the rear casters to level the unit.
Shortening the eyebolt will lower the rear of the
drill.
Refer to the operator's manual for more
explanation on the correct procedures.
9). Pull ahead slowly with the openers and coulters just touching the ground to
make sure that the track left by the coulter is centered on the opener.
