LC25/40
Important Safety Information
3
2018-08-15
591-049M
Check for Overhead Lines
The implement requires at least 14 feet (4.3 m) vertical
clearance in transport. Contacting overhead electrical
lines can introduce lethal voltage levels on implement
and tractor frames. A person touching almost any metal
part can complete the circuit to ground, resulting in
serious injury or death. At higher voltages, electrocution
can occur without direct line or body contact.
Avoid overhead lines during folding, unfolding, transport
and parking.
Shutdown and Storage
Lower implement, put tractor in park, turn off engine, and
remove the key.
Secure implement using blocks and supports provided.
Detach and store implement in an area where children
normally do not play.
Practice Safe Maintenance
Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.
Work in a clean, dry area.
Lower the implement, put tractor in park, turn off engine,
and remove key before performing maintenance.
Make sure all system pressure is relieved.
Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on
implement.
Inspect all parts. Make sure parts are in good condition
and installed properly.
Remove buildup of grease, oil or debris.
Remove all tools and unused parts from implement before
operation.