GREAT PLAINS FCA 4500-7275, Assembly Manual, Page: 27 / 58

FCA4500 Table of Contents Index Assembly 23
2019-03-21 Table of Contents Index 560-594Q-ENG
Attach Hose Clamps and Hose wraps
Refer to Figure 25
115.When all the hoses are hooked up and tightened
properly, put hose clamps on hoses as shown.
116.Install hose wraps on hoses as needed.
 Be sure and get hoses and light wiring harness
fastened properly so they do not drag. Check to be
sure there is enough slack in hinge area when folding
machine the first time.
Hydraulic Handle Hook Up
 The towers on the Field Cultivator will not retract
during folding if the tractor does not have a live
power pin in the 7 pin harness.
If towers on wings do not retract during folding, crack any
hydraulic hose fitting behind the check valve to relieve
pressure on the towers. If this warning is ignored damage to
the implement is certain.
Figure 25
Hose Clamp Assembly
41583
Figure 26
Cultivator to Cart Hydraulic Hook Up
43822
Figure 26
Cart to Tractor Hydraulic Hook Up
43822