GREAT PLAINS 8323, Assembly Manual

Page: 29 / 142

Product # Table of Contents Index Assembly
Great Plains | 560-484Q-ENG | 2021 - 02 - 09 Table of Contents Index 25
Attach Hose Clamps and Hose wraps
Refer to Figure 29
153.When all the hoses are hooked up and tightened properly,
put hose clamps on hoses as shown.
154.Install hose wraps on hoses as needed.

Be sure and get hoses and light wiring harness
fastened properly so they do not drag. Check to be
sure there is enough slack in hinge area when folding
machine the first time.
Hydraulic Hose Hookup
155.Great Plains hydraulic hoses are color coded to help you
hookup hoses to your tractor outlets. Hoses that go to the
same remote valve are marked with the same color.
Hose Handles
Refer to Figure 30
156.To distinguish hoses on the same hydraulic circuit, refer to
hose handles. The hose under an extended-cylinder
symbol feeds a cylinder base end. The hose under a
retracted-cylinder symbol feeds a cylinder rod end.
157.Once all hoses are tightened, hook hoses to tractor.
Color Hydraulic Function
Black Lift (2 hoses)
Green Fold (2 hoses)
Figure 29
Hose Clamp Assembly
41583
High Pressure Fluid Hazard:
Relieve pressure before disconnecting hydraulic lines. Use
paper or cardboard, NOT BODY PARTS, to check for leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems. Escaping fluid under pressure
can have sufficient pressure to penetrate the skin causing
serious injury. If an accident occurs, seek immediate medical
assistance from a physician familiar with this type of injury.
Only trained personnel should work on system hydraulics.
Figure 30
Hose Handles
41552