GREAT PLAINS 7000 Series, Predelivery Manual

Page: 12 / 38

Great Plains | 556-427Q | 2020-01-16 Table of Contents Index 8
7000 Series Disk Table of Contents Index Assembly
Center Frame Gang Assembly
Refer to Figure 5
 The gang assemblies (1) will be marked as to the location
on disk as “left, front”. This would refer to the left, front
gang. You may also refer to the machine layout section for
placement.
8. Secure the gang assemblies (1) to the frame (2) with the
6
1

32
” x 7
3

4
” u-bolts (3)
3

4
” lock washers and
3

4
” hex
nuts. For gang placement see layouts in “ Appendix -
Reference Information ”
9. Bolts may be tightened to specs, See “ Torque Values
Chart ” on page 16.
Figure 5
Gang to Frame Assembly
TP-69504
1
2
1
3