7000 Series Disk
Assembly
Great Plains
| 556-427Q | 2020-01-16
7
Assembly
Narrow Center Hub and Wheel Assembly
All bolts will be pre-installed on the unit in their proper
location. Bolts will need to be removed and then re-
installed during assembly. See “Parts Manual” for
complete break down of parts.
1. Set the two center frame section (11) on stands (12) that
are tall enough to allow for installation of the wheel hubs
and tires as shown.
2. Bolt the sections together using
3
4
” x 2
1
4
” (13) hex bolts
and secure with
3
4
” lock washers and
3
4
” nuts.
3. Use 1.25x7.575 hardened pins (23) to attach torque tube
to frame, to secure in place use
1
2
x 2
5
8
Gr 8 bolt and
lock nut.
4. Bolt on SMV bracket (14) with a
3
4
x 5
1
32
x 5
1
2
” (15) u-
bolts and secure with
3
4
” lock washers and
3
4
” nuts.
Secure the SMV sign (24) to the bracket using
1
4
x
3
4
”
pan head screws (17),
1
4
” lock washers and”
1
4
hex nuts.
5. To assemble the transport, bolt on spindles (18) use
3
4
x 5” Gr. 8 (19),
3
4
lock washer and nut, to secure to the
torque tube (20).
6. Install tire/wheel (21) with
9
16
” lug nuts (22).
7. Bolts may be tightened to specs, See “
Torque Values
Chart
” on page 14.
11
22
21
18
19
U
D
F
B
L
R
13
12
14
20
15
17
23
24
Figure 4
Frame, Hub and Wheel
TP-69418
