GREAT PLAINS 3S-4000HD, Operator'S Manual, Page: 10 / 118

Great Plains Manufacturing, Inc.
Table of Contents Index Important Safety Information 7
2019-03-14
Table of Contents Index
195-067M
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
Center of rear center section;
1 total
838-266C
Red Reflectors
On rear walkboard face, outside corners, center section;
2 total
18832
27015