GREAT PLAINS 1510P, Operator'S Manual

Page: 83 / 146

1510P & 1520P Table of Contents Index Veris Drive Operating Instructions
Great Plains | 118-732M | 4/4/19 Table of Contents Index 79
Drive Calibration Number
1. Turn on Veris Console Monitor by pressing ON/VR
key.
 Green light above ON/VR key will illuminate when
power is on.
2. Adjust desired metering rate by pressing the Up/
Down arrow keys.
Refer to Figure 80
3. Press Function key until Calibration Number
window appears.
Refer to Figure 81
4. Use Up/Down arrow keys to set Calibration
Number.
Refer to Figure 82
 NOTE: Select drive Calibration Number based on
row spacing and metering wheel, from chart on page
81.
Figure 80
Figure 81
Figure 82