Great Plains
| 118-732M | 4/4/19
76
1510P & 1520P
Veris Drive Operating Instructions
Tractor Hookup
Hydraulics:
1.
Connect pressure hose (P) to retraction outlet.
2.
Connect motor return hose (T) to motor return port (if
available) or to extension outlet.
3.
Set flow rate at maximum.
4.
If tractor is equipped with electro-hydraulic valves set
timer to “constant” flow.
Electrical:
Power can be connected in three different manners:
Option 1: Power Port Adapter (P/N VER-19676)
Refer to Figure 78
1.
Connect harness to power wire from implement.
Option 2: Connect to the Battery:
Refer to Figure 79
1.
Connect female socket to power port adapter.
2.
Connect red wire eyelet to 5 amp post.
3.
Connect black wire eyelet to center (ground) post.
Option 3: Connect to 12V Power Box (P/N 823-
202C).
1.
Connect female socket to power port adapter.
2.
Connect red wire eyelet to 5 amp post.
3.
Connect black wire eyelet to center (ground) post.
22713
Connect to Console
Connect to Power Port
Figure 78
Connect to Power Wire from Implement
Figure 79
22714
