GREAT PLAINS 1510P, Operator'S Manual

Page: 38 / 146

Great Plains | 118-732M | 4/4/19 Table of Contents Index 34
1510P & 1520P Table of Contents Index Adjustments
Cleaning Out Meters
 NOTE: Shut off sliding seed tubes before attempting
to clean out seed meters.
Refer to Figure 34
For seed meter clean out:
1. Position tarp or buckets under the opener(s) whose
meter(s) you will be cleaning out.
2. Remove retaining clip and pull pin.
Refer to Figure 35
3. Pull up on meter clean out door to open.
Refer to Figure 36
4. When meter is empty, push meter clean out door
back to its original position to close.
 NOTE: You may need to shake the clean out door a
little before closing to make sure all seeds fall out.
5. Replace pin and retaining clip
Figure 34
Meter Clean Out
18261
Retaining Clip
Clean Out Door
19190
Clean Out Door
Figure 35
Meter Clean Out Door
18293
Clean Out Door
Figure 36
Replacing Pin