GREAT PLAINS 1007NT, Operator'S Manual, Page: 25 / 86

Great Plains Manufacturing, Inc.
Operating Instructions 21
03/18/2019 150-290M
For Any Transport
Keep Clearance in Mind
Remember that the drill may be wider than the tractor.
Allow safe clearance.
Observe Road Rules
Comply with all national, regional and local safety laws
when traveling on public roads.
Trailer Transport
Loading Trailer
1. Hitch raised and locked drill to suitable tractor.
2. Carefully line-up the tractor, drill and trailer, so that:
a. no turns are needed for the final movement, and
b. the casters are fully reversed.
3. Lower caster swivel lock pins to lock position
(page 19).
4. Carefully back the drill onto the trailer bed.
5. Remove transport locks and lower the drill (page 18).
6. Unhitch the tractor.
7. Secure the load with cargo straps or chains.
Unloading Trailer
1. Release cargo straps or chains.
2. Hitch suitable tractor with available hydraulic remote
(page 14).
3. Confirm that caster pivot swivel locks are still in
place (page 19).
4. Raise drill (page 18).
5. Install lift-assist cylinder transport locks (page 18).
6. Carefully tow drill from trailer.
7. Remove caster pivot swivel locks.
Unstable Load Hazard : Do not transport on a trailer of insuf-
ficient width or length. Unless all transport tires are on the
bed, too few openers are supporting the entire drill. The load
may spill, with risk of serious injury or death to anyone
nearby, and certainty of major equipment damage.
Load Maneuvering Hazard - Use care and planning when
loading or unloading the drill in trailer transport. The rear
casters may turn and force the drill off the trailer.
Make sure the trailer is rated for the load.
Make sure the trailer is wide enough for the load.
Make sure the load is secured properly.