Page 3
Step 4: Attach front and side shelves.
Required:
(2) side shelves; (1) left and (1) right front shelf; (2) shelf inserts
(6) #10–24 x 1/2” bolts; (6) #10–24 locknuts (see below)
Hook the left and right front shelves over the
corresponding front shelf supports, push towards
the grill base. Attach to the bottom of the control
console with (1) bolt and (1) nut each (Fig. 4a).
Assemble the side shelves to the shelf supports by
positioning them half way over the supports, then
sliding them towards the base, while pushing down
firmly on the front edge. The slots at the front edge
of the shelf should align with the tabs at the back of
the shelf supports (Fig. 4b).
NOTE:
On models with Side Burners, assemble the shelf with the open center
to the right-hand side of the grill. After completing this step, follow the
instructions in the Side Burner Kit.
Tap the shelf lightly to fully engage the slot and tab if necessary
(Fig 4c). Once aligned, fasten with a nut and bolt to the
underside of the supports (Fig. 4b).
GP450/ GP600 ASSEMBLY
2
1
(6) #10–24 Locknut
(6) #10–24 x 1/2” Bolt
Fig. 4a
Fig. 4b
(View rotated 90
°
)
Slot
Tab
Fig. 4c
