4
Hardware for Step 1:
2x #1 Cam Dowels
STEP 1:
Using a Phillips Screwdriver, insert 1x cam dowel (#1) into the central hole on
BOTH side rail panels A & B.
Hardware for Step 2:
4x #2 Wooden Dowels
STEP 2:
Take panel B and insert 2x wooden dowels (#2) in the remaining central holes
and then push support base panel C onto the hardware.
Insert 1x cam lock into the large drill hole on panel C at the connection point
and turn clockwise to lock.
Repeat this step at the other end of panel C, joining it to panel A.
A
B
#1
#1
#1
A
B
C
#3
#3
#2
#2
#2
#2
2x #3 Cam Locks
#3
#2
Using Cam Locks:
When inserting into the panel, ensure that each
cam lock’s arrow is pointing towards the drill
hole on the side edge of the panel & the dowel
that it will be receiving.
When the panels are in the connected position,
using a screwdriver, turn the cam lock in a
clockwise direction to lock and secure.
The larger drill holes of
panel C to be facing up.
