Great Little Trading Junior L5294 Manual Download Page 2

2

IMPORTANT! 
READ CAREFULLY AND KEEP 
FOR FUTURE REFERENCE

 

SAFETY WARNINGS!

•  This product has been designed, manufactured and tested to comply 

with BS EN 17191:2021 seating for children.

•  Adult assembly required. 

•  Unassembled product contains small parts which may present a choking 

hazard. 

•  Assemble and use on a flat and level surface. 

•  Children should be kept away from the product during assembly to 

avoid any possible risk of injury. 

•  This product is suitable for children in the age range of 3 years plus. 

•  Maximum weight load 100Kg. Do not overload. 

•  DO NOT place this product near a window as it can be used as a step 

by the child and cause the child to fall out of the window.

•  DO NOT place this product near a window where cords from blinds 

or curtains could strangle a child.

•  Be aware of the risk of open fires and other sources of strong heat in 

the vicinity of the product.

•  DO NOT use power tools in the assembly of this product as there is a 

risk of over-tightening and consequently splitting of the wood. 

•  Check all fixtures and fittings regularly and tighten as necessary. 

•  WARNING. Do not use this bench if any part becomes broken, torn 

or missing. Please contact GLTC Customer Services on 0344 848 6000 
immediately to arrange for suitable replacement parts.

Customer Service:
• 

If you find that any components are missing or damaged, please do 
not begin assembly and do not use the item. Please contact GLTC 
Customer Services on 

0344 848 6000 immediately.

• 

We do stock spare hardware packs at our warehouse, so we should be 
able to send you a replacement pack immediately if required.  

Product Care:
• 

Wipe clean using a soft damp cloth followed by a dry cloth.

• 

The painted/lacquered surface is resistant to staining if cleaned 
immediately, however please protect the surface from contact with 
ball point pen and indelible style felt markers as the ink is by nature 
permanent.

• 

Do NOT use cleaning products which contain ammonia, solvents or 
abrasive material.

• 

Do NOT expose the item to extremes of heat and humidity.

Could we do better? 
If there is anything you think could be improved in these instructions or in 
the assembly of this product we’d be grateful if you could let us know; we’ll 
pass any helpful hints and tips on to other customers via our website and 
update the instructions. 

All you need to do is drop us a line at 

[email protected] 

Thank you

Summary of Contents for Junior L5294










Reviews: