4
oPeRaTinG dooR handLe
The door swing handles have been installed at the manufacturer.
No additional assembly is required. The EZ doors have a three point
latching system. To operate the swing handle, lift up at the bottom of
the handle then swing the handle to the right to open. The handle must
be kept in this position to close the door. Return the handle to the initial
position and use the key provided to lock the handle.
Important note: Doors are reversible, but require
an additional hinge kit. Please contact your
distributor/Great Lakes representative for the
EZ Hinge Kit.
loading equipment
WARNING: Only install equipment after the EZ Enclosure has been
properly secured. Do not move the EZ Enclosure assembly while
loaded.
Rated or maximum load capacity for the EZ Enclosure is 1000 lbs.
(3000 lb. non-seismic weight capacity). Enclosure must be secured to
floor using the included AK101 Seismic Anchor Bolts.
To maintain a uniform distribution of the mechanical load in the EZ
Enclosure, load the heaviest equipment first, at the bottom of the
EZ Enclosure and load the lighter units at the top.
