PAGE 2 OF 3
FIG.1 FIG. 2
FIG. 3
FIG. 4 FIG. 5
1) Insert mounting
bars into Tool Tray
cradle.
(FIG. 1 & 2)
2)
With someone’s help,
attach Tool Tray assembly to
roll bar of vehicle using 2-
3/8” U bolts, 4- 3/8” flat
washers, and 4- 3/8”
locknuts.
(FIG. 3)
3.)
Center Tool Tray between roll bars.
(FIG.4
). Drill ¼” hole through one
mounting bar
. (FIG.5)
Secure with 1- ¼” x 1 ¾” bolt. 2-flat washers and 1- ¼”
locknut. (This is to keep tray from sliding side to side.)
